This industrial O-ring, constructed from Viton and featuring a Carbon Steel housing, offers exceptional sealing performance in aggressive environments. Its robust design ensures reliable containment of fluids and gases, minimizing leakage and downtime.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 1.479" |
| Outside Diameter | 1.201" |
| Cross Section | 0.130" |
Specified by design engineers worldwide, this industrial O-ring is engineered for precision sealing. It boasts a precise Inside Diameter of 1.479 inches, an Outside Diameter of 1.201 inches, and a Cross Section of 0.130 inches. The Viton material provides outstanding resistance to a broad spectrum of chemicals, oils, fuels, and high temperatures up to 400°F (204°C), making it ideal for demanding hydraulic, pneumatic, and automotive systems where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from burrs. 2. Lightly lubricate the O-ring with a compatible lubricant to facilitate installation and prevent damage. 3. Carefully install the O-ring into the groove, avoiding excessive stretching or twisting, ensuring a snug fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing O-ring on a dirty or damaged groove. | Thoroughly clean and inspect the groove for any imperfections before installation. Address any burrs or damage to prevent premature seal failure. |
| Over-stretching or twisting the O-ring during installation. | Use a lubricant and gentle pressure to guide the O-ring into the groove. Avoid using sharp tools that can nick or cut the seal. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic systems, Automotive fuel systems, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||