Engineered for extreme chemical and thermal resistance, this Viton O-ring with a brass fitting ensures superior sealing integrity in aggressive industrial environments. Its robust construction guarantees longevity and reliable performance.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 5.082" |
| Outside Diameter | 10.656" |
| Cross Section | 0.082" |
Precision-manufactured to tight tolerances, this industrial O-ring boasts an Inside Diameter (ID) of 5.082 inches and an Outside Diameter (OD) of 10.656 inches, with a 0.082-inch cross-section. The Viton material offers exceptional resistance to a wide range of chemicals, fuels, oils, and high temperatures (up to 400°F / 204°C), making it suitable for challenging hydraulic, pneumatic, and fluid power systems. The integrated brass fitting provides secure and corrosion-resistant interfacing for robust assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect both the groove and the O-ring for any damage or debris. 2. Lightly lubricate the O-ring with a compatible lubricant. 3. Carefully install the O-ring into the designated groove, ensuring it is seated without twisting or stretching excessively.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Use a lubricant and appropriate tools to gently guide the O-ring into the groove, avoiding excessive tension. |
| Installing on a dirty or damaged groove. | Thoroughly clean the groove and ensure there are no nicks, burrs, or foreign particles that could compromise the seal. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Hydraulic systems, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||