This industrial O-ring, fabricated from premium Viton, ensures superior sealing performance in challenging environments. Its robust construction and precise dimensions guarantee reliable operation under extreme conditions.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 3.959" |
| Outside Diameter | 8.192" |
| Cross Section | 0.127" |
Built to exacting engineering tolerances, this industrial O-ring boasts an Inside Diameter (ID) of 3.959 inches, an Outside Diameter (OD) of 8.192 inches, and a Cross Section (CS) of 0.127 inches. The advanced Viton material offers exceptional resistance to high temperatures, aggressive chemicals, oils, and fuels, making it ideal for demanding applications where standard elastomers would degrade. Its low compression set ensures long-term sealing integrity. Manufactured to meet stringent industrial standards, this O-ring provides a dependable barrier against leaks in critical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch and install the O-ring into the groove, avoiding excessive force or sharp tools that could nick or cut the sealing surface. 3. Verify proper seating and retention of the O-ring within the groove before assembling the mating component.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing on a dirty or damaged groove surface. | Thoroughly clean and inspect the groove for any imperfections before installation. Use a lint-free cloth and appropriate cleaning solvent if necessary. |
| Using excessive force or sharp tools during installation. | Apply gentle, even pressure. If a tool is required, use a soft plastic or wood insertion tool designed for O-ring installation to prevent damage to the seal. |
| Using incompatible lubricants or excessive amounts of lubricant. | Consult the O-ring and system manufacturer for recommended lubricants. Apply a thin, even coat to facilitate installation and prevent seal degradation. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Aerospace hydraulic systems, Automotive fuel and oil seals, Chemical processing equipment, High-temperature industrial machinery, Oil and gas exploration components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||