Engineered for extreme operating conditions, this Viton O-ring features a robust brass core for enhanced structural integrity. It provides superior sealing in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 5.613" |
| Outside Diameter | 8.707" |
| Cross Section | 0.242" |
Purpose-built for heavy-duty applications, this industrial O-ring boasts a precisely machined brass core for dimensional stability and superior sealing performance under pressure. The Viton (FKM) elastomer offers exceptional resistance to high temperatures, aggressive chemicals, oils, and fuels, making it ideal for harsh chemical processing, aerospace, automotive, and oil & gas industries. With an Inside Diameter of 5.613 inches, an Outside Diameter of 8.707 inches, and a Cross Section of 0.242 inches, this O-ring is designed to maintain seal integrity in critical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from debris. 2. Carefully install the O-ring into its designated groove, avoiding any twisting or stretching. 3. Apply a thin layer of compatible lubricant if recommended for the specific application to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Twisting or spiraling the O-ring during installation. | Install the O-ring by carefully pressing it into the groove, ensuring it lies flat without any twisting. |
| Using an incorrect lubricant that is incompatible with Viton. | Consult the material compatibility chart for Viton and use only approved lubricants. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, High-Temperature Hydraulic Systems, Fuel and Oil Handling Systems, Aerospace and Automotive Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||