This premium Viton industrial O-ring, encased in a robust 304 stainless steel housing, offers superior sealing performance. Engineered for extreme environments, it provides exceptional resistance to chemicals and high temperatures.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 9.785" |
| Outside Diameter | 5.272" |
| Cross Section | 0.139" |
Manufactured under strict quality controls, this industrial O-ring features a precise 9.785-inch inside diameter, a 5.272-inch outside diameter, and a 0.139-inch cross-section. The Viton elastomer provides excellent resistance to a wide range of aggressive chemicals, fuels, oils, and high temperatures up to 400°F (204°C). The 304 stainless steel housing ensures structural integrity and corrosion resistance in harsh industrial settings, making it ideal for demanding fluid and gas sealing applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully install the O-ring into its designated groove, avoiding any stretching or twisting. 3. Apply a light lubricant compatible with the sealing material if necessary to facilitate installation and ensure proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring without excessive tension. It should fit snugly but not be deformed. |
| Using incompatible lubricants. | Always use lubricants recommended for Viton and the specific application environment to prevent material degradation. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||