Engineered for demanding industrial applications, this Viton O-ring, crafted from robust Titanium Grade 5, ensures exceptional sealing performance under extreme temperatures and chemical exposure.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.878" |
| Outside Diameter | 10.310" |
| Cross Section | 0.215" |
Manufactured under strict quality controls, this industrial O-ring features a precise Inside Diameter of 7.878 inches, an Outside Diameter of 10.310 inches, and a Cross Section of 0.215 inches. The advanced Viton material, renowned for its excellent resistance to heat, oils, fuels, and aggressive chemicals, is reinforced by the superior strength and corrosion resistance of Titanium Grade 5. This combination makes it ideal for critical sealing duties in aerospace, chemical processing, and high-temperature hydraulic systems where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and absence of damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant (e.g., silicone grease). 3. Carefully install the O-ring into the groove, avoiding stretching or twisting, ensuring it seats properly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring without excessive stretching; it should fit snugly but not be under undue tension. |
| Using incompatible lubricants that degrade the Viton. | Utilize only lubricants specifically recommended for Viton and the operating environment. |
| Installing into a dirty or damaged groove. | Thoroughly clean and inspect the groove before installation to prevent leaks and premature failure. |
A: This Industrial O-Ring, Viton is manufactured from Titanium Grade 5.
A: Aerospace fluid systems, Chemical processing equipment, High-temperature hydraulic seals, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||