This high-performance industrial O-ring, constructed from robust Viton with Nylon reinforcement, offers superior sealing capabilities in extreme temperature and corrosive chemical environments. Engineered for reliability and longevity.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 6.891" |
| Outside Diameter | 0.908" |
| Cross Section | 0.240" |
Designed for demanding industrial environments, this Viton O-ring features a 6.891" inside diameter, 0.908" outside diameter, and a 0.240" cross-section. The advanced Viton material provides exceptional resistance to high temperatures, aggressive chemicals, fuels, and oils, while the integral Nylon reinforcement enhances its structural integrity and extrusion resistance under high pressure. This combination ensures a durable, leak-proof seal in challenging applications where standard elastomers would fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the sealing groove and mating surfaces for cleanliness and absence of debris. 2. Carefully stretch the O-ring over the component, ensuring it seats evenly within the groove without twisting or excessive force. 3. Verify the O-ring is properly seated and not pinched before assembly completion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, causing extrusion or damage to the O-ring. | Tighten fasteners to the manufacturer's recommended torque specifications to prevent over-compression. |
| Using lubricants incompatible with Viton, leading to material degradation. | Consult the material compatibility chart and use only approved lubricants for Viton O-rings. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Hydraulic and pneumatic systems, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||