This industrial O-ring, constructed from high-performance Viton, ensures exceptional sealing in demanding environments. Its robust design provides superior resistance to chemicals and extreme temperatures, guaranteeing reliable fluid containment.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 3.168" |
| Outside Diameter | 9.508" |
| Cross Section | 0.229" |
Engineered for reliability and performance, this industrial O-ring boasts an Inside Diameter of 3.168 inches, an Outside Diameter of 9.508 inches, and a precise Cross Section of 0.229 inches. Fabricated from premium Viton (FKM), it offers outstanding resistance to a broad spectrum of aggressive chemicals, fuels, oils, and high temperatures up to 400°F (204°C). Its inherent low compression set ensures long-term sealing integrity in critical hydraulic, pneumatic, and automotive applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly lubricated. 2. Carefully stretch the O-ring over the component and gently guide it into the groove, avoiding any sharp edges or tools that could cause nicks or cuts. 3. Verify the O-ring is seated evenly and without twists within the groove, confirming a uniform seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dry O-ring, leading to increased friction and potential damage. | Always lubricate the O-ring and groove with a compatible lubricant before installation. |
| Twisting the O-ring during installation, compromising its sealing capability. | Ensure the O-ring is seated flat and without any twists in the groove. |
| Using sharp tools or excessive force, which can nick or cut the O-ring. | Employ appropriate, non-marring installation tools and apply only necessary force. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Chemical Processing Equipment, Automotive Fuel Systems, High-Temperature Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||