This Titanium Grade 5 U-Bolt is specifically designed for securing 3" nominal pipe. Its advanced alloy construction offers unparalleled corrosion resistance and high tensile strength, ensuring reliable performance in aggressive industrial and marine applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 2.10" |
| Inside Length ( B) | 6.59" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this U-bolt is fabricated from aerospace-grade Titanium Grade 5 (Ti-6Al-4V), renowned for its exceptional strength-to-weight ratio and superior resistance to saltwater, chemicals, and stress corrosion cracking. The precise dimensions, including an inside width (A) of 2.10 inches and an inside length (B) of 6.59 inches, are optimized for a secure fit on standard 3" pipe. The 1/2"-13 UNC threads are precisely rolled for maximum thread engagement and fatigue life, providing robust load-bearing capacity in demanding environments where conventional materials would fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the pipe surface and the interior of the U-bolt to remove any debris or contaminants. 2. Position the U-bolt around the 3" pipe, ensuring the pipe rests evenly within the curved section. 3. Thread the provided nuts onto the U-bolt legs, tightening them incrementally and alternately to achieve uniform pressure. Torque to manufacturer specifications, if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts, which can distort the U-bolt or damage the pipe. | Use a torque wrench to tighten nuts to the recommended specification for the pipe and U-bolt size. |
| Using a U-bolt with incorrect dimensions for the pipe size. | Verify the pipe's nominal size and the U-bolt's inside width (A) and inside length (B) match the application's requirements before installation. |
A: This Titanium Grade 5 U-Bolt, 3" Pipe is manufactured from Titanium Grade 5.
A: Marine and offshore piping systems, Chemical processing equipment, Aerospace structural support, High-corrosion industrial environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||