Engineered from aerospace-grade Titanium Grade 5, this robust U-bolt securely fastens 3" pipes. Its exceptional strength-to-weight ratio and superior corrosion resistance make it ideal for harsh industrial and marine applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 3.57" |
| Inside Length ( B) | 7.62" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this U-bolt is precisely formed from Titanium Grade 5 (Ti-6Al-4V), offering unparalleled tensile strength and fatigue resistance. With an inside width (A) of 3.57 inches and an inside length (B) of 7.62 inches, it is designed to accommodate standard 3-inch nominal pipe sizes. The 1/2"-13 UNC threads ensure secure engagement with compatible nuts and washers, providing a reliable and long-lasting fastening solution in corrosive or high-stress environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it is centered and properly seated. 2. Place washers and nuts onto the threaded ends of the U-bolt. 3. Tighten nuts evenly in an alternating pattern until the desired clamping force is achieved, referring to torque specifications if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts, which can strip threads or deform the pipe. | Use a torque wrench to adhere to recommended torque specifications for the thread size and material. |
| Using standard steel nuts and washers, leading to galvanic corrosion with titanium. | Always use compatible titanium or high-grade stainless steel fasteners to prevent galvanic corrosion. |
A: This Titanium Grade 5 U-Bolt, 3" Pipe is manufactured from Titanium Grade 5.
A: Marine and offshore piping systems, Chemical processing equipment, Aerospace structural support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||