Engineered for extreme environments, this Titanium Grade 5 U-Bolt secures 3" pipes with exceptional strength and corrosion resistance. Ideal for chemical, marine, and aerospace applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 3.96" |
| Inside Length ( B) | 6.48" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this U-Bolt is forged from Titanium Grade 5 (Ti-6Al-4V), renowned for its superior strength-to-weight ratio, excellent corrosion resistance, and biocompatibility. The 3.96" inside width is precisely calibrated to accommodate standard 3" nominal pipe, while the 6.48" inside length offers ample clearance for insulation or structural considerations. Featuring a robust 1/2"-13 UNC thread size, it ensures secure fastening with compatible nuts and washers. This construction provides unparalleled performance in aggressive media and high-stress conditions where standard materials would fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-Bolt around the pipe and through the mounting surface. 2. Thread nuts onto the bolt legs until snug. 3. Tighten nuts alternately to achieve uniform clamping force, referencing torque specifications if available.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening U-bolt nuts without torque specification. | Use a calibrated torque wrench to tighten nuts to the manufacturer's recommended torque values to prevent material deformation or fastener failure. |
| Using incompatible thread size nuts. | Always ensure that the nuts used have the matching 1/2"-13 UNC thread size to guarantee secure and proper engagement. |
A: This Titanium Grade 5 U-Bolt, 3" Pipe is manufactured from Titanium Grade 5.
A: Chemical Processing Plants, Offshore Oil and Gas Platforms, Marine and Shipbuilding, Aerospace and Defense.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||