This premium Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precision manufactured for demanding industrial and aerospace applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.874" |
| Length | 29" |
| Width | 35" |
Built to exacting engineering tolerances, this Titanium Grade 5 stock sheet measures 0.874 inches in thickness, 29 inches in length, and 35 inches in width. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium, it provides an outstanding combination of high tensile strength, moderate ductility, and excellent weldability. Its inherent biocompatibility and resistance to a wide range of corrosive environments make it suitable for critical components in aerospace, medical implants, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the sheet surface to remove any contaminants. 2. Prepare mating surfaces according to design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fastening methods as dictated by the application's engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or joint integrity. | Always degrease and meticulously clean all surfaces before assembly or further processing. |
| Using incorrect welding parameters for Titanium Grade 5, resulting in embrittlement or porosity. | Consult qualified welding procedures and ensure inert gas shielding (e.g., Argon) is maintained throughout the welding process. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||