This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to demanding specifications, it's ready for critical applications in aerospace, medical, and harsh industrial environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.639" |
| Length | 32" |
| Width | 37" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.639 inches thick, 32 inches in length, and 37 inches in width. Grade 5 titanium alloys are known for their excellent mechanical properties, including high tensile strength, fatigue resistance, and superb corrosion resistance in aggressive media. This material is commonly utilized in aerospace structural components, aircraft landing gear, and engine parts, as well as in the biomedical field for implants due to its biocompatibility. Its high performance makes it suitable for demanding applications in the oil and gas industry and high-performance sporting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended application and environmental conditions. 2. Ensure proper handling and storage to prevent contamination or damage. 3. Fabricate using appropriate machining and welding procedures for titanium alloys, following industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard tooling and speeds designed for carbon steel or aluminum. | Employ specialized tooling and adjust cutting speeds and feed rates appropriate for titanium alloys to prevent premature tool wear and ensure clean cuts. |
| Inadequate cleaning and surface preparation before welding or bonding. | Thoroughly degrease and clean the titanium surface with appropriate solvents and mechanical brushing to remove any oxides or contaminants that could compromise weld integrity or bond strength. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace Structural Components, Biomedical Implants, High-Performance Marine Hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||