This robust Titanium Grade 5 stock sheet offers superior strength-to-weight ratio and exceptional corrosion resistance, engineered for critical material handling and heavy-duty industrial environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.787" |
| Length | 15" |
| Width | 35" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a thickness of 0.787 inches, a length of 15 inches, and a width of 35 inches. Its high tensile strength, excellent fatigue resistance, and superior corrosion immunity make it ideal for components in corrosive atmospheres, high-temperature environments, and applications requiring exceptional durability. The material's biocompatibility also lends itself to specialized handling equipment in certain sectors. This alloy's excellent weldability and formability further enhance its utility in fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications against project requirements. 2. Ensure proper cutting and machining tools are used for Titanium Grade 5. 3. Follow established welding procedures for Ti-6Al-4V if fabrication is required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to rapid tool wear and inefficient cuts. | Employ specialized carbide or ceramic tooling designed for titanium alloys to ensure clean cuts and extend tool life. |
| Inadequate surface preparation before welding, resulting in porosity or weak welds. | Thoroughly degrease and clean the weld area using appropriate solvents and a wire brush specifically for titanium to remove surface contaminants. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Chemical processing equipment components, Aerospace structural elements, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||