This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for critical suspending and bracing applications where performance is paramount.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.944" |
| Length | 33" |
| Width | 29" |
Precision-manufactured to tight tolerances, this 0.944" thick, 33" long, and 29" wide Titanium Grade 5 (Ti-6Al-4V) sheet exhibits excellent mechanical properties. Grade 5 titanium offers a remarkable combination of high tensile strength, fatigue resistance, and toughness, alongside outstanding resistance to oxidizing and reducing environments. Its low density further enhances its utility in weight-sensitive structures. This material is the industry standard for aerospace, medical implants, and high-performance industrial components requiring extreme reliability and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certification and dimensions against project specifications. 2. Prepare edge surfaces for joining or fastening, ensuring they are clean and free of contaminants. 3. Employ appropriate joining techniques (e.g., welding, mechanical fastening) suitable for Titanium Grade 5, adhering to industry best practices and pre-heating/post-heating considerations if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication techniques without understanding titanium's unique properties. | Consult specific welding procedures and tooling designed for titanium alloys to prevent material degradation and ensure joint integrity. |
| Inadequate surface preparation leading to poor adhesion or compromised weld quality. | Thoroughly degrease and mechanically clean all surfaces before any joining or finishing operations. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance marine bracing, Corrosion-resistant industrial supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||