This Titanium Grade 5 stock sheet offers superior strength, lightweight performance, and excellent corrosion resistance. Precisely manufactured to demanding specifications, it's ideal for critical applications where material integrity is paramount.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.438" |
| Length | 13" |
| Width | 18" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.438 inches in thickness, 13 inches in length, and 18 inches in width. Exhibiting a tensile strength typically exceeding 130 ksi and a yield strength of around 120 ksi, it boasts an exceptional strength-to-weight ratio. Its inherent biocompatibility and resistance to a wide range of corrosive environments make it a preferred choice for aerospace components, medical implants, chemical processing equipment, and high-performance marine applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Accurately mark and cut to the required dimensions using appropriate tooling for titanium. 3. Prepare edges for joining or further processing as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Employ high-speed steel or carbide tooling with appropriate feeds and speeds to prevent tool wear and ensure clean cuts. |
| Improper surface preparation before welding or bonding. | Thoroughly degrease and mechanically clean the surfaces to ensure optimal adhesion or weld integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Chemical processing equipment, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||