This Titanium Grade 5 stock sheet is engineered for critical pneumatic systems. Its exceptional strength, lightweight properties, and superior corrosion resistance make it ideal for demanding industrial environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.228" |
| Length | 19" |
| Width | 16" |
A high-performance industrial component, this Titanium Grade 5 stock sheet (0.228" thickness, 19" length, 16" width) is manufactured to exacting tolerances. Grade 5 titanium alloy (Ti-6Al-4V) offers an unparalleled strength-to-weight ratio, excellent fatigue strength, and outstanding resistance to a wide range of corrosive media, including saltwater and various industrial chemicals. This makes it exceptionally suited for high-pressure pneumatic cylinders, valve components, and housings where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Cut to desired shape using appropriate machining techniques for titanium alloys (e.g., waterjet, EDM, or carbide tooling). 3. Deburr all edges to prevent stress risers and ensure smooth operation within pneumatic assemblies.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium, leading to excessive heat and tool wear. | Utilize specialized tooling and coolant systems designed for machining titanium alloys to maintain edge integrity and prevent thermal damage. |
| Neglecting to properly deburr edges after cutting, which can cause premature wear or seal damage in pneumatic components. | Thoroughly deburr all cut edges using fine-grit abrasives or specialized deburring tools to ensure a smooth, clean finish. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic cylinder bodies, Custom valve components, Corrosion-resistant pneumatic housing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||