This high-performance Titanium Grade 5 stock sheet offers superior strength-to-weight ratio and excellent corrosion resistance, ideal for critical components in demanding pneumatic systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.107" |
| Length | 38" |
| Width | 20" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.107 inches thick, 38 inches in length, and 20 inches in width. Grade 5 titanium provides exceptional mechanical properties, including high tensile strength, fatigue resistance, and excellent performance in corrosive environments, making it a preferred material for high-pressure pneumatic cylinders, valve bodies, and specialized fittings. Its biocompatibility and low density further enhance its suitability for advanced engineering solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is clean and free from contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate tooling for titanium. 3. Fabricate components following established design specifications, maintaining tolerances critical for pneumatic sealing and operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper adjustments. | Utilize carbide or diamond-coated tooling designed for titanium machining to prevent premature wear and ensure clean cuts. |
| Improper welding procedures leading to embrittlement. | Employ inert gas welding (e.g., Argon) with strict atmosphere control to prevent contamination and maintain material integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Pneumatic Cylinder Components, High-Pressure Valve Housings, Specialized Pneumatic Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||