This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to industrial standards, it's engineered for critical applications where performance is paramount.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.200" |
| Length | 31" |
| Width | 13" |
A high-performance industrial component, this Titanium Grade 5 stock sheet measures 0.200 inches in thickness, 31 inches in length, and 13 inches in width. Composed of Ti-6Al-4V, it boasts a yield strength of approximately 128 ksi and an ultimate tensile strength of 138 ksi, with excellent fatigue strength and biocompatibility. Its lightweight nature, combined with remarkable resistance to oxidation and general corrosion, makes it ideal for aerospace structural components, medical implants, and high-stress industrial tooling. The material's exceptional properties ensure longevity and reliability under extreme environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or damage incurred during transit. 2. Precisely cut to desired dimensions using appropriate tooling for titanium alloys (e.g., abrasive waterjet or EDM). 3. Deburr all cut edges to remove sharp points and ensure a smooth finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can lead to excessive heat and material hardening. | Employ specialized tooling and cooling methods designed for titanium alloys to prevent thermal damage and maintain material integrity. |
| Improper handling leading to surface scratches or contamination, compromising corrosion resistance. | Handle with clean, non-marring gloves and store in a protected environment to maintain surface quality. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance industrial tooling and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||