This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for demanding safety applications. Its biocompatibility further enhances its suitability for critical environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.780" |
| Length | 42" |
| Width | 48" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.780 inches thick, 42 inches in length, and 48 inches in width. Exhibiting excellent tensile strength, fracture toughness, and fatigue resistance, this aerospace-grade alloy is widely utilized in aerospace, medical implants, and high-performance structural components where reliability and safety are paramount. Its inherent passivity provides outstanding resistance to a broad spectrum of corrosive agents, ensuring long-term integrity in harsh operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper surface preparation, free from contaminants. 2. Utilize appropriate cutting and forming tools designed for titanium alloys. 3. Employ compatible welding procedures and filler materials if required, following industry best practices for titanium fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper lubrication. | Employ specialized carbide or high-speed steel tooling with ample coolant and slower feed rates to prevent galling and tool wear. |
| Inadequate post-weld heat treatment. | Implement specified post-weld heat treatment cycles to relieve residual stresses and restore optimal mechanical properties. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||