This Titanium Grade 5 stock sheet, at 0.032" thick, 22" wide, and 29" long, offers exceptional strength-to-weight ratio and corrosion resistance, ideal for demanding suspending and bracing applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.032" |
| Length | 22" |
| Width | 29" |
Specified by design engineers worldwide, this 0.032" thick Titanium Grade 5 stock sheet (22" x 29") provides superior mechanical properties including high tensile strength (up to 132,000 psi), excellent fatigue resistance, and remarkable corrosion resistance in various environments. Its biocompatibility and low density make it suitable for aerospace, medical, and industrial applications requiring reliable structural integrity and minimal weight. This material is commonly processed through machining and forming for custom component fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before fabrication. 2. Precisely cut to required dimensions using appropriate tooling for titanium. 3. Fabricate any necessary bends, holes, or attachments according to design specifications, employing techniques suitable for Ti-6Al-4V. 4. Securely integrate the fabricated component into the suspending or bracing system, verifying all load-bearing points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Employ specialized carbide or high-speed steel tooling with appropriate cutting speeds and lubrication to prevent premature tool wear and ensure clean cuts. |
| Inadequate post-fabrication cleaning leading to potential corrosion. | Thoroughly clean all surfaces after fabrication using non-chlorinated solvents or passivation processes to remove debris and prevent surface degradation. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aircraft structural components, Medical implants and surgical instruments, High-performance marine hardware, Corrosion-resistant structural bracing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||