This Titanium Grade 5 stock sheet offers superior strength-to-weight ratio and exceptional corrosion resistance. Engineered for critical applications, it ensures reliability in harsh environments and demanding performance requirements.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.193" |
| Length | 32" |
| Width | 29" |
Designed for demanding industrial environments, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.193 inches in thickness, 32 inches in length, and 29 inches in width. Exhibiting a tensile strength of approximately 130-140 ksi and a yield strength of 120 ksi, it provides excellent mechanical properties. Its inherent passivation layer ensures superior resistance to a wide array of corrosive media, making it suitable for aerospace, marine, medical implants, and chemical processing equipment where durability and inertness are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended application environment. 2. Ensure proper cutting and shaping tools are used to avoid material stress or contamination. 3. Implement appropriate welding or joining techniques as specified by industry standards for Ti-6Al-4V.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper coolant or speed adjustments. | Utilize carbide or specialized titanium cutting tools with high-speed steel, maintaining adequate coolant flow to prevent overheating and tool wear. |
| Inadequate preparation of joint surfaces prior to welding. | Thoroughly clean and degrease all mating surfaces to remove any surface contaminants that could compromise weld integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||