This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Ideal for fabricating robust, high-performance components in demanding industrial environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.579" |
| Length | 41" |
| Width | 12" |
A high-performance industrial component, this Titanium Grade 5 stock sheet is manufactured to exacting standards, measuring 0.579 inches thick, 41 inches in length, and 12 inches in width. Grade 5 titanium, also known as Ti-6Al-4V, provides a superior combination of high strength, low density, excellent corrosion resistance, and good weldability. Its excellent mechanical properties make it suitable for applications requiring resistance to extreme environments and significant structural integrity under load. This material is widely specified in aerospace, medical implants, and high-end industrial equipment where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and fabrication equipment is properly calibrated for titanium. 2. Precisely cut the stock sheet to the required dimensions using appropriate tooling. 3. Smooth all edges and surfaces to remove any burrs or imperfections as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools without proper lubrication. | Utilize specialized carbide or high-speed steel tooling with copious amounts of cutting fluid designed for titanium alloys to prevent tool wear and ensure clean cuts. |
| Inadequate surface preparation before welding or joining. | Thoroughly clean and degrease the titanium surfaces to be joined, removing any oxide layers or contaminants, to ensure optimal weld integrity and material performance. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Customized Material Handling Fixtures, High-Strength Structural Components, Corrosion-Resistant Brackets and Supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||