This Titanium Grade 5 stock sheet offers superior strength-to-weight ratio and outstanding corrosion resistance, ideal for critical pneumatic components where performance and longevity are paramount.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.193" |
| Length | 46" |
| Width | 46" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.193 inches thick, 46 inches in length, and 46 inches in width. Its aerospace-grade composition ensures exceptional mechanical properties, including high tensile strength, fatigue resistance, and a low coefficient of thermal expansion. This makes it the material of choice for high-pressure pneumatic cylinders, valve bodies, and manifold systems operating in corrosive or extreme temperature environments, guaranteeing reliability and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of any contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate machining methods. 3. Fabricate into desired pneumatic components, adhering to all design specifications and welding procedures if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Utilize carbide-tipped or specialized tooling with ample coolant to prevent overheating and ensure clean cuts. |
| Improper welding techniques leading to embrittlement. | Employ inert gas shielding (e.g., Argon) and maintain strict control over heat input to preserve the material's ductility and strength. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Pneumatic cylinder barrels, High-pressure valve bodies, Pneumatic manifold blocks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||