This premium Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and unparalleled corrosion resistance. Engineered for critical safety applications where reliability and performance are paramount.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.999" |
| Length | 18" |
| Width | 34" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.999 inches in thickness, 18 inches in length, and 34 inches in width. Meeting stringent ASTM B265 standards, Grade 5 exhibits a remarkable tensile strength of 138,000 psi and yield strength of 130,000 psi, along with excellent biocompatibility and fatigue resistance. Its high melting point and inert nature make it suitable for aerospace components, medical implants, and demanding industrial safety equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications and dimensions against project requirements. 2. Ensure proper cutting and shaping tools are used, respecting titanium's hardness. 3. Implement appropriate welding or joining techniques for titanium alloys, following industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for hardened alloys. | Utilize carbide-tipped or diamond-coated cutting tools with appropriate coolant to prevent excessive heat buildup and tool wear. |
| Inadequate attention to surface cleanliness prior to joining. | Thoroughly degrease and clean all surfaces with an appropriate solvent immediately before any welding or bonding process to ensure optimal joint integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance industrial safety equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||