This Titanium Grade 5 stock sheet provides exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for high-performance pneumatic systems operating in harsh industrial conditions.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.766" |
| Length | 27" |
| Width | 41" |
Designed for demanding industrial environments, this Titanium Grade 5 stock sheet boasts a thickness of 0.766 inches, a length of 27 inches, and a width of 41 inches. Grade 5 titanium (Ti-6Al-4V) is an alpha-beta alloy renowned for its excellent mechanical properties, including high tensile strength, fatigue resistance, and exceptional resistance to corrosive media, making it a prime choice for critical pneumatic components exposed to aggressive fluids or extreme temperatures. Its biocompatibility and light weight further enhance its suitability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare mating surfaces for a clean, flat interface. 2. Ensure proper alignment of the sheet with the pneumatic component. 3. Secure using approved fastening methods, adhering to torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to leaks. | Thoroughly clean and degrease all mating surfaces before assembly to ensure a robust seal. |
| Over-tightening fasteners, causing material deformation. | Utilize calibrated torque wrenches and follow recommended torque values for titanium fasteners to prevent overstressing the sheet. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic cylinder bodies, Pneumatic valve components in corrosive environments, Air-actuated tooling and equipment housing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||