This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, ideal for high-performance pneumatic systems where reliability and durability are paramount.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.893" |
| Length | 21" |
| Width | 27" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.893 inches thick, 21 inches in length, and 27 inches in width. Grade 5 titanium, an alpha-beta alloy, exhibits excellent tensile strength, fatigue strength, and moderate ductility, making it suitable for components exposed to corrosive environments, high pressures, and extreme temperatures. Its biocompatibility and non-magnetic properties further enhance its utility in specialized pneumatic assemblies. Rigorous quality control ensures consistent material properties and dimensional accuracy for critical engineering designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Carefully align the Titanium Grade 5 sheet with the intended pneumatic component. 3. Securely fasten the sheet according to the design specifications, utilizing appropriate fasteners and torque values.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to potential leaks or stress points. | Thoroughly clean and degrease all surfaces before installation to ensure a proper seal and prevent premature component failure. |
| Over-tightening fasteners, which can cause localized deformation or damage to the titanium sheet. | Adhere strictly to the recommended torque specifications for all fasteners to prevent material stress and ensure structural integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic cylinder components, Corrosion-resistant pneumatic valve bodies, Lightweight actuator housings for aerospace pneumatics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||