This Titanium Grade 5 stock sheet is engineered for exceptional performance in critical pneumatic systems. Its superior strength-to-weight ratio and exceptional corrosion resistance ensure reliability and longevity in challenging environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.373" |
| Length | 45" |
| Width | 24" |
A high-performance industrial component, this Titanium Grade 5 stock sheet measures 0.373 inches in thickness, 45 inches in length, and 24 inches in width. Fabricated from Ti-6Al-4V alloy, it offers an outstanding combination of high strength, low density, excellent corrosion resistance, and good weldability. Its biocompatibility further extends its utility. These properties make it an ideal material for components subjected to high stress, corrosive media, and extreme temperature fluctuations within pneumatic machinery, including specialized valve bodies, piston rods, and cylinder liners where failure is not an option.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants before machining. 2. Utilize appropriate cutting tools and speeds for titanium alloys to prevent excessive heat buildup and tool wear. 3. Follow established welding procedures for Titanium Grade 5 if fabrication is required, ensuring a controlled atmosphere to prevent contamination.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper cooling. | Employ carbide or high-speed steel tooling with flood coolant or dry machining with compressed air to manage heat effectively. |
| Inadequate inert gas shielding during welding. | Utilize a high-purity Argon or Helium shielding gas with proper flow rates to prevent oxidation and embrittlement. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic valve components, Corrosion-resistant pneumatic actuator cylinders, Specialized pneumatic tooling housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||