This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for high-stress pneumatic system components. Engineered for reliability in demanding environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.878" |
| Length | 23" |
| Width | 23" |
Built to exacting engineering tolerances, this Titanium Grade 5 stock sheet measures 0.878 inches thick, 23 inches in length, and 23 inches in width. Composed of 6% Aluminum and 4% Vanadium (Ti-6Al-4V), it exhibits an ultimate tensile strength of 130,000 psi and a yield strength of 120,000 psi. Its excellent biocompatibility and resistance to corrosive media are critical for advanced pneumatic actuators, valves, and high-pressure containment vessels where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate tooling for titanium. 3. Weld or fasten according to established aerospace or industrial standards for Ti-6Al-4V.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can lead to tool wear and improper cuts. | Utilize specialized carbide or diamond-tipped tooling designed for cutting titanium alloys. |
| Inadequate post-machining cleaning, leaving residual cutting fluids or debris. | Thoroughly degrease and clean the cut edges with an appropriate solvent to ensure surface integrity for subsequent operations. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Pneumatic Actuator Housings, High-Pressure Pneumatic Valves, Corrosion-Resistant Pneumatic Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||