This Titanium Grade 5 stock sheet offers exceptional strength, corrosion resistance, and biocompatibility. Precisely manufactured to 0.527" thickness, 20" width, and 39" length, it's ready for demanding fabrication.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.527" |
| Length | 20" |
| Width | 39" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet is engineered for critical applications. Its 0.527" thickness, 20" length, and 39" width provide a substantial raw material for complex components. Ti-6Al-4V offers an excellent balance of high strength, low density, and superior corrosion resistance, making it the material of choice for aerospace airframes, engine components, medical implants, and high-performance sporting goods.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certification and dimensions against design requirements. 2. Prepare edges for welding or machining according to process specifications. 3. Fabricate components using appropriate tooling and techniques for titanium alloys.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before welding. | Thoroughly clean titanium surfaces with a degreaser and a stainless steel brush dedicated solely to titanium to prevent contamination. |
| Using improper cutting speeds and feeds. | Utilize slower speeds and higher feed rates with appropriate cutting fluids to manage heat and prevent work hardening during machining. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and devices, High-performance automotive parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||