Engineered for critical pneumatic systems, this Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Its robust composition ensures reliability in challenging environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.837" |
| Length | 15" |
| Width | 12" |
Trusted by engineers across multiple sectors, this Titanium Grade 5 stock sheet (0.837" thickness, 15" length, 12" width) is fabricated from Ti-6Al-4V, a widely recognized alpha-beta titanium alloy. This material boasts excellent biocompatibility, high tensile strength of approximately 130 ksi, and a high fatigue limit, making it ideal for components subjected to cyclic loading and corrosive media. Its low density (4.5 g/cm³) further enhances performance in weight-sensitive pneumatic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended pneumatic fluid and operating conditions. 2. Precisely cut the sheet to the required dimensions using appropriate machining techniques for titanium alloys. 3. Ensure all edges are deburred and surfaces are clean prior to assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium. | Employ carbide or high-speed steel tooling with adequate coolant and slow feed rates to prevent overheating and tool wear. |
| Inadequate surface preparation leading to premature corrosion. | Thoroughly clean and degrease the titanium surface before installation to remove any contaminants that could initiate corrosion. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic valve bodies, Cylinder components in corrosive atmospheres, Aerospace pneumatic actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||