This 0.787" thick Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured to 48" x 27", it's engineered for critical industrial applications demanding peak performance.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.787" |
| Length | 48" |
| Width | 27" |
A proven choice for industrial professionals, this Titanium Grade 5 stock sheet boasts a thickness of 0.787 inches, a length of 48 inches, and a width of 27 inches. Titanium Grade 5 (Ti-6Al-4V) is a dual-phase alloy offering excellent strength, toughness, and fatigue resistance, alongside superior biocompatibility and resistance to saltwater corrosion. This makes it indispensable for aerospace structural components, marine hardware, medical implants, and high-performance sporting goods where reliability under extreme conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications and dimensions against project requirements. 2. Ensure proper cutting and shaping tools are used to avoid material stress or damage. 3. Implement appropriate joining techniques (e.g., welding, fastening) suitable for Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Utilize specialized carbide or diamond-tipped cutting tools with adequate coolant to prevent tool wear and material overheating. |
| Inadequate surface preparation before welding or bonding. | Thoroughly clean the titanium surface to remove oxides, grease, and contaminants using appropriate degreasers and wire brushes. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine hardware and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||