This industrial-grade Titanium Grade 5 stock sheet offers superior strength-to-weight ratio and exceptional corrosion resistance. Precisely manufactured for critical applications, it's a vital component for advanced engineering projects.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.052" |
| Length | 47" |
| Width | 15" |
Precision-manufactured to tight tolerances, this 0.052-inch thick Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 15 inches in width and 47 inches in length. Composed of approximately 6% aluminum and 4% vanadium, this alloy exhibits excellent mechanical properties, including high tensile strength, fatigue strength, and fracture toughness, even at elevated temperatures. Its inert nature provides superior resistance to oxidation and corrosion in aggressive environments. This sheet is ideally suited for fabrication in aerospace components, medical implants, marine hardware, and high-performance sporting goods where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with intended application and environment. 2. Ensure proper cutting and shaping tools are selected for Titanium Grade 5, utilizing adequate lubrication. 3. Employ appropriate joining techniques such as welding or mechanical fastening, adhering to industry standards for titanium alloys.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without appropriate adjustments. | Utilize carbide or specialized titanium cutting tools with slower speeds and increased feed rates, along with coolant, to prevent excessive heat buildup and tool wear. |
| Inadequate surface preparation before welding. | Thoroughly clean the titanium surface to remove any oxides, oils, or contaminants using a stainless steel brush dedicated solely to titanium to prevent contamination. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine hardware and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||