This Titanium Grade 5 stock sheet, with dimensions of 0.469 inches thick, 37 inches long, and 27 inches wide, offers exceptional strength-to-weight ratio and superior corrosion resistance for critical pneumatic systems.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.469" |
| Length | 37" |
| Width | 27" |
Engineered for reliability and performance, this Titanium Grade 5 (Ti-6Al-4V) stock sheet provides a robust solution for extreme environments. Its exceptional strength (tensile strength ~130 ksi) and low density (~0.16 lb/in³) make it ideal for high-pressure pneumatic components and aerospace applications where weight reduction is paramount. The material's inherent biocompatibility and resistance to galvanic corrosion further enhance its suitability for sensitive pneumatic circuits and marine environments. This particular sheet, measuring 0.469" x 37" x 27", is precisely manufactured to meet stringent industry tolerances.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with surrounding components and operating environment. 2. Precisely cut sheet to required dimensions using appropriate tooling for titanium. 3. Ensure all machined edges are deburred and cleaned thoroughly before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools on titanium. | Utilize specialized carbide or ceramic tooling designed for titanium alloys to prevent premature tool wear and ensure clean cuts. |
| Inadequate cleaning of the surface before welding or bonding. | Thoroughly degrease and decontaminate the titanium surface with approved solvents to ensure optimal weld integrity and prevent contamination. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic cylinders, Corrosion-resistant pneumatic valve bodies, Lightweight pneumatic manifold blocks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||