This premium Titanium Grade 5 stock sheet is engineered for critical pneumatic applications requiring exceptional strength, lightweight design, and superior corrosion resistance. Ideal for demanding environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.703" |
| Length | 23" |
| Width | 33" |
Built to exacting engineering tolerances, this Titanium Grade 5 stock sheet boasts a thickness of 0.703 inches, a length of 23 inches, and a width of 33 inches. Titanium Grade 5 (Ti-6Al-4V) offers an outstanding strength-to-weight ratio, excellent fatigue strength, and superior resistance to corrosive environments prevalent in advanced pneumatic systems. Its biocompatibility and non-magnetic properties further enhance its suitability for specialized applications where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean, dry, and free from contaminants. 2. Carefully position the Titanium Grade 5 sheet according to design specifications. 3. Securely fasten using appropriate aerospace-grade fasteners and torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for titanium's strength. | Utilize aerospace-grade fasteners designed for high-strength alloys to prevent premature failure. |
| Inadequate surface preparation leading to poor sealing. | Thoroughly clean and degrease all contact surfaces before assembly to ensure optimal seal integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic actuators, Aerospace pneumatic components, Corrosive environment fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||