This Titanium Grade 5 stock sheet offers exceptional strength, low density, and superior corrosion resistance, making it ideal for high-performance pneumatic components and systems demanding reliability.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.965" |
| Length | 29" |
| Width | 38" |
Built to exacting engineering tolerances, this 0.965" thick Titanium Grade 5 stock sheet (29" x 38") boasts a high tensile strength exceeding 800 MPa and a density of approximately 4.5 g/cm³. Its biocompatibility and excellent fatigue strength ensure longevity in critical pneumatic applications. Ideal for valve bodies, actuator housings, and high-pressure manifold systems where weight reduction and resistance to harsh environments are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Machine to precise component drawings utilizing appropriate tooling and coolant for titanium alloys. 3. Perform post-machining inspections to ensure adherence to critical dimensional and surface finish requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard machining parameters for steel alloys, leading to tool wear and poor surface finish. | Employ specialized cutting speeds, feed rates, and robust tooling designed for titanium machining, along with ample coolant flow. |
| Inadequate cleaning procedures leading to contamination and potential corrosion in service. | Thoroughly degrease and clean the machined components using appropriate non-abrasive solvents and lint-free materials. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic valve components, Actuator housings for aerospace and defense, Corrosion-resistant pneumatic manifold systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||