This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it the material of choice for critical industrial components and demanding environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.963" |
| Length | 41" |
| Width | 44" |
Built to exacting engineering tolerances, this Titanium Grade 5 stock sheet features a precise thickness of 0.963 inches, a length of 41 inches, and a width of 44 inches. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium (Ti-6Al-4V), it exhibits excellent biocompatibility, fatigue strength, and resistance to oxidation and saltwater corrosion. Its high strength-to-weight ratio makes it suitable for aerospace, marine, and chemical processing applications where performance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended application environment. 2. Ensure proper handling and cutting procedures to maintain material integrity. 3. Implement appropriate welding or joining techniques as per industry standards for Ti-6Al-4V.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Employ specialized tooling with appropriate coatings and cooling lubricants for titanium machining to prevent excessive heat buildup and tool wear. |
| Inadequate surface preparation before welding or joining. | Thoroughly clean the surfaces to be joined, removing any oxides, oils, or contaminants using approved solvents and mechanical abrasion, followed by inert gas purging during welding. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and subsea equipment, Chemical processing equipment, High-performance sporting goods.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||