This industrial-grade Titanium Grade 5 stock sheet offers unparalleled strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to exacting standards, it is the ideal material for critical engineering and fabrication projects.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.884" |
| Length | 21" |
| Width | 38" |
A proven choice for industrial professionals, this Titanium Grade 5 stock sheet boasts a thickness of 0.884 inches, a length of 21 inches, and a width of 38 inches. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium, Grade 5 (Ti-6Al-4V) exhibits excellent tensile strength, fatigue resistance, and biocompatibility. Its remarkable inertness to a wide range of corrosive environments makes it indispensable for aerospace components, medical implants, marine hardware, and high-performance industrial equipment where reliability under extreme conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended application and environment. 2. Ensure proper cutting and machining techniques are employed to maintain material integrity. 3. Implement appropriate joining methods such as welding or mechanical fastening suitable for titanium alloys.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel welding procedures without modification. | Utilize inert gas welding (e.g., TIG) with argon shielding gas to prevent oxidation and contamination, and preheat appropriately if required. |
| Improper surface preparation leading to poor adhesion or weld quality. | Thoroughly clean the titanium surface to remove any oils, greases, or oxides using appropriate solvents and mechanical abrasion. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Biomedical implants and devices, Chemical processing equipment, High-performance marine hardware, Sporting goods and custom fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||