This robust Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, ideal for critical pneumatic components and demanding industrial environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.862" |
| Length | 16" |
| Width | 24" |
Built to exacting engineering tolerances, this Titanium Grade 5 stock sheet measures 0.862 inches thick, 16 inches in length, and 24 inches in width. Composed of Ti-6Al-4V alloy, it exhibits an ultimate tensile strength typically exceeding 130,000 psi and a yield strength over 120,000 psi, coupled with excellent biocompatibility and resistance to a wide range of corrosive media. Its low density, approximately 4.43 g/cm³, makes it exceptionally suitable for weight-sensitive pneumatic systems where performance and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is clean and free from contaminants. 2. Precisely cut to required dimensions using appropriate machining techniques for titanium. 3. Fabricate components with consideration for titanium's work hardening characteristics during forming or welding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Utilize carbide or high-speed steel tooling with proper coolant and feed rates to prevent premature tool wear and ensure clean cuts. |
| Inadequate surface preparation before welding or joining. | Thoroughly degrease and mechanically clean the titanium surface to a bright finish to ensure sound weld integrity and prevent contamination. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic cylinders, Corrosion-resistant valve bodies, Lightweight actuator components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||