This high-performance Titanium Grade 5 stock sheet, precisely engineered to 0.781" thickness, provides exceptional strength, corrosion resistance, and a superior strength-to-weight ratio for critical industrial fabrications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.781" |
| Length | 35" |
| Width | 41" |
Specified by design engineers worldwide, this Titanium Grade 5 stock sheet exhibits a nominal thickness of 0.781 inches, a width of 41 inches, and a length of 35 inches. Composed of Ti-6Al-4V, it offers an excellent combination of high tensile strength, fracture toughness, and weldability, making it ideal for aerospace components, medical implants, marine hardware, and high-performance sporting goods where extreme durability and lightweight properties are paramount. Its passivation layer ensures outstanding resistance to corrosive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface integrity against design specifications. 2. Prepare edges for joining or fabrication according to welding or machining procedures. 3. Execute fabrication processes in a controlled environment to maintain material properties.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Attempting to machine without appropriate tooling or coolant. | Utilize carbide or high-speed steel tooling with ample lubrication and cooling to prevent excessive heat buildup and tool wear. |
| Inadequate surface preparation before welding. | Thoroughly clean and decontaminate the weld joint area to remove any oxides, oils, or contaminants that could compromise weld integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance marine hardware, Medical implant substrates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||