This Titanium Grade 5 stock sheet provides exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to meet demanding industrial specifications for critical applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.780" |
| Length | 48" |
| Width | 25" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.780 inches in thickness, 48 inches in length, and 25 inches in width. Exhibiting excellent biocompatibility and fatigue strength, it is ideal for aerospace components, marine structures, and medical implants. Its high tensile strength and resistance to saltwater and corrosive environments make it a premium choice for high-performance applications where reliability is paramount. Material composition adheres to ASTM B265 standards.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper handling and lifting procedures to prevent damage to the sheet edges. 2. Verify the sheet dimensions and material certification against project requirements. 3. Prepare the intended mounting or fabrication surface according to design specifications, considering any necessary surface treatments for titanium.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for titanium alloys, leading to tool wear and poor cut quality. | Utilize carbide-tipped or specialized aerospace-grade cutting tools designed for titanium machining to ensure clean cuts and extend tool life. |
| Inadequate preparation of welding surfaces, causing weld defects and reduced joint integrity. | Thoroughly degrease and clean welding areas with a suitable solvent, followed by passivation or etching if required by the specific welding process. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine hardware and offshore structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||