This high-performance Titanium Grade 5 stock sheet is engineered for demanding industrial and aerospace environments. Its exceptional strength, low density, and corrosion resistance make it ideal for critical component fabrication.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.773" |
| Length | 34" |
| Width | 13" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers superior performance characteristics. With a precise thickness of 0.773 inches, a generous length of 34 inches, and a width of 13 inches, it is ideally suited for manufacturing structural components, high-stress fixtures, and specialized tooling where extreme durability and lightweight properties are paramount. Grade 5 titanium exhibits excellent tensile strength, fracture toughness, and fatigue resistance, making it the material of choice for aerospace, marine, and advanced industrial sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of contaminants. 2. Carefully measure and mark cut lines according to design specifications. 3. Utilize appropriate cutting tools designed for titanium alloys (e.g., waterjet, EDM, or specialized saws) with adequate cooling. 4. Deburr all edges thoroughly to remove sharp protrusions and prevent stress risers.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper cooling. | Employ specialized titanium cutting tools and maintain adequate coolant flow to prevent overheating and tool damage. |
| Failing to properly deburr edges after cutting. | Thoroughly deburr all cut edges to eliminate sharp points and reduce the risk of material fatigue or damage during subsequent processing. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance tooling and fixtures, Marine hardware and subsea equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||