This high-performance Titanium Grade 5 stock sheet is precision-manufactured for critical pneumatic systems. Its exceptional strength-to-weight ratio and corrosion resistance ensure unparalleled durability and operational efficiency in challenging environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.751" |
| Length | 20" |
| Width | 29" |
Engineered for reliability and performance, this Titanium Grade 5 stock sheet offers a robust solution for extreme pneumatic applications. With dimensions of 0.751 inches thick, 20 inches in length, and 29 inches in width, it leverages the superior properties of Ti-6Al-4V alloy, boasting an impressive tensile strength, excellent fatigue resistance, and superior biocompatibility. This material's inherent inertness makes it ideal for environments exposed to corrosive media, high pressures, and wide temperature fluctuations, ensuring longevity and preventing contamination in sensitive pneumatic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Precisely cut the Titanium Grade 5 sheet using appropriate tooling for titanium alloys (e.g., waterjet, EDM, or specialized milling). 3. Deburr and clean all cut edges to remove any sharp points or contaminants before integration into the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys, leading to poor edge quality and excessive tool wear. | Employ cutting methods and tooling specifically engineered for machining titanium, such as diamond-coated inserts or specialized waterjet cutting parameters. |
| Inadequate edge preparation after cutting, leaving burrs that can cause leaks or damage seals within the pneumatic system. | Thoroughly deburr and polish all cut edges using appropriate finishing tools and techniques to ensure a smooth, leak-free surface. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic valve bodies, Custom pneumatic actuator components, Corrosion-resistant pneumatic manifold blocks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||