This high-performance Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for critical pneumatic system components.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.640" |
| Length | 39" |
| Width | 27" |
Manufactured under strict quality controls, this Titanium Grade 5 stock sheet measures 0.640 inches in thickness, 39 inches in length, and 27 inches in width. Grade 5 titanium (Ti-6Al-4V) is a dual-phase alloy renowned for its excellent mechanical properties, including high tensile strength, fatigue resistance, and remarkable corrosion resistance, especially in aggressive environments. Its biocompatibility and light weight are also key advantages for advanced pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and integrity prior to cutting. 2. Utilize appropriate cutting tools designed for titanium alloys to prevent excessive heat buildup and material deformation. 3. Ensure all mating surfaces are clean and free of contaminants before assembly into pneumatic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper cooling. | Employ specialized titanium cutting fluids and coolant systems to manage heat and maintain tool integrity. |
| Improper surface preparation leading to seal failure. | Thoroughly clean and degrease all surfaces that will interface with seals or other components to ensure optimal sealing performance. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic cylinder bodies, Corrosion-resistant pneumatic valve components, Lightweight pneumatic actuator housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||