This Titanium Grade 5 stock sheet, precisely dimensioned at 0.609" x 31" x 37", delivers superior corrosion resistance and biocompatibility. Ideal for critical applications requiring high performance.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.609" |
| Length | 31" |
| Width | 37" |
A proven choice for industrial professionals, this Titanium Grade 5 (Ti-6Al-4V) stock sheet exhibits an exceptional strength-to-weight ratio, high tensile strength, and excellent fatigue strength. Its nominal composition of 6% Aluminum and 4% Vanadium provides superior performance in demanding environments. The precise dimensions of 0.609" thickness, 31" length, and 37" width make it suitable for precision machining and fabrication in aerospace components, medical implants, marine hardware, and high-performance sporting goods where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications and dimensions against project requirements. 2. Ensure appropriate cutting tools and safety equipment are utilized for titanium. 3. Follow established machining or fabrication procedures for Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper setup. | Employ specialized carbide or high-speed steel tooling designed for titanium, with adequate coolant and controlled feed rates. |
| Inadequate surface preparation before welding or joining. | Thoroughly clean and degrease the titanium surface to prevent contamination, which can compromise joint integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine hardware and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||