This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, engineered for critical pneumatic system components where reliability and performance are paramount.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.579" |
| Length | 15" |
| Width | 25" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.579 inches in thickness, 15 inches in width, and 25 inches in length. Its aerospace-grade alloy composition provides an ultimate tensile strength typically exceeding 130 ksi and a yield strength over 120 ksi, with excellent fatigue strength and biocompatibility. This material is ideal for constructing robust, lightweight, and corrosion-resistant components within high-pressure pneumatic systems, including valve bodies, actuators, and specialized housings exposed to aggressive environments or requiring minimal mass.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, free of debris, and properly machined for a secure fit. 2. Apply appropriate sealant or gasket material as specified by system design requirements. 3. Fasten the sheet securely using recommended hardware, adhering to torque specifications to prevent over-stressing the material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to leaks. | Thoroughly clean and inspect all mating surfaces for flatness and absence of contaminants before assembly. |
| Over-torquing fasteners, causing material deformation or fracture. | Utilize a calibrated torque wrench and strictly adhere to specified torque values during installation. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic valve bodies, Lightweight actuator components, Corrosion-resistant pneumatic housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||