Precision-engineered Titanium Grade 5 stock sheet, offering superior strength-to-weight ratio and excellent corrosion resistance. Ideal for demanding applications requiring high performance and reliability.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.529" |
| Length | 25" |
| Width | 35" |
Manufactured under strict quality controls, this Titanium Grade 5 stock sheet boasts a thickness of 0.529 inches, a width of 25 inches, and a length of 35 inches. Composed of Ti-6Al-4V alloy, it exhibits an ultimate tensile strength of approximately 130-145 ksi and a yield strength of 120-135 ksi, with a density of 0.163 lb/in³. Its excellent biocompatibility and resistance to saltwater and various industrial chemicals make it suitable for critical components in aerospace structures, medical implants, and high-performance marine equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from surface contaminants. 2. Machining operations should utilize appropriate cutting speeds and coolant. 3. Welding requires inert gas shielding and proper pre/post-weld heat treatment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium. | Utilize carbide or high-speed steel tooling with a positive rake angle and ample coolant to prevent overheating and tool wear. |
| Inadequate surface preparation before welding. | Thoroughly degrease and mechanically clean the weld area to remove any oxides or contaminants that could compromise weld integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||