This high-performance Titanium Grade 5 stock sheet offers exceptional strength, lightweight properties, and superior corrosion resistance. Precisely manufactured to meet stringent industry standards for critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.525" |
| Length | 37" |
| Width | 19" |
Built to exacting engineering tolerances, this Titanium Grade 5 stock sheet measures 0.525 inches in thickness, 37 inches in length, and 19 inches in width. Composed of Ti-6Al-4V alloy, it exhibits a tensile strength exceeding 130 ksi and a yield strength over 120 ksi, with a density of approximately 0.163 lb/in³. Its excellent biocompatibility and high fatigue strength make it ideal for aerospace components, medical implants, and high-stress industrial equipment where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and free from debris. 2. Accurately mark cut lines using a suitable scribe or marker. 3. Employ appropriate cutting tools designed for titanium alloys, such as abrasive waterjet or specialized milling equipment, to achieve precise dimensions and minimize heat affected zones. 4. Deburr all cut edges to remove sharp points and prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools on titanium. | Utilize specialized tooling and cutting parameters optimized for titanium alloys to prevent excessive heat build-up, tool wear, and material deformation. |
| Ignoring edge preparation after cutting. | Thoroughly deburr all cut edges to remove burrs and sharp edges, which can lead to premature failure or create hazards during handling and subsequent processing. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Biomedical implants and devices, High-performance marine equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||