This premium Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to industry-leading standards for critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.492" |
| Length | 39" |
| Width | 39" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet exhibits a nominal thickness of 0.492 inches (12.5 mm), a length of 39 inches (990.6 mm), and a width of 39 inches (990.6 mm). Meeting stringent aerospace and industrial specifications, its alloy composition provides a tensile strength typically exceeding 130 ksi and excellent fatigue strength. This material's inherent biocompatibility and inertness make it suitable for demanding environments where high performance and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and well-lit. 2. Utilize appropriate cutting tools designed for titanium alloys to achieve precise dimensions. 3. Deburr all cut edges thoroughly to prevent stress risers and improve surface finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper lubrication or cooling. | Employ specialized carbide or diamond-tipped tooling with high-pressure coolant specifically formulated for titanium to prevent overheating and tool wear. |
| Inadequate edge preparation after cutting. | Always deburr and radiuse all cut edges to a smooth, consistent finish to mitigate potential crack initiation points and improve downstream processing. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||