This Titanium Grade 5 stock sheet is engineered for extreme environments. Its exceptional strength-to-weight ratio and resistance to corrosion make it ideal for critical aerospace, medical, and chemical processing applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.490" |
| Length | 13" |
| Width | 34" |
A high-performance industrial component, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.490 inches thick, 13 inches in length, and 34 inches in width. Exhibiting a minimum tensile strength of 130 ksi and a yield strength of 120 ksi, this alloy provides excellent ductility and fracture toughness while maintaining a low density of approximately 4.43 g/cm³. Its remarkable corrosion resistance in saltwater, chlorine, and various acidic environments ensures longevity and reliability in harsh operational conditions, making it a preferred choice for structural components, fasteners, and specialized tooling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure a clean and dry working surface. 2. Accurately measure and mark cut lines according to design specifications. 3. Utilize appropriate cutting tools designed for titanium alloys, such as waterjet or abrasive waterjet cutting, to minimize heat-affected zones and material stress. Maintain proper coolant flow. 4. Deburr all cut edges to remove sharp points and prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper cooling. | Employ specialized titanium cutting tools and ensure adequate coolant application to prevent overheating and material degradation. |
| Ignoring the importance of edge deburring. | Thoroughly deburr all cut edges to eliminate stress risers and improve the fatigue life of the component. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and devices, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||